Creating workplaces where we all watch out for each other

Creating workplaces where we all watch out for each other

Working near belt conveyors: Recent deaths spur MSHA safety alert

Home / Single Blog

Recent Blog.

Subscribe Newsletter.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi tellus enim.

Follow Us On.

Lock Out Tag Out Procedures Archives - Mine Safety Center

First published by Safety+Health an NSC publication.

Arlington, VA — Spurred by numerous fatalities related to the hazards of working near belt conveyors, the Mine Safety and Health Administration has issued a safety alert.

Published on Sept. 3, the alert states that eight fatalities involving belt conveyors have occurred in the industry since Jan. 26, 2017. Six involved miners working near a moving conveyor, and two occurred during maintenance on an idle conveyor.

“All of these fatalities could have been prevented with proper lockout/tagout and blocking against motion before working,” the alert states.

MSHA details the most recent incident, which occurred in December and remains under investigation. A miner was fatally injured after removing a splice pin from a mainline conveyor that was caught between the belt and frame of the belt tailpiece.

The agency lists multiple best practices for working safely near belt conveyors, including:

  • Identify, isolate and control stored mechanical, electrical, hydraulic and gravitational energy.
  • Effectively block the belt conveyor to prevent movement in either direction.
  • Relieve belt tension by releasing energy at the take up/belt storage system. Remember: Some tensile energy might still exist.
  • Position belt splice in an area of safe access to avoid pinch points.
  • De-energize electrical power, and lock and tag the main disconnect before beginning maintenance. Permit only the person who installed a lock and tag to remove them – and only after completing the work.
  • Never lock out start and stop controls or belt switches, as they don’t disconnect power conductors.

McCraren Compliance assists employers in protecting their workers, starting with a comprehensive Work-site Analysis, Hazard Prevention, Controls, and Safety & Health Training.

Please contact us today at 888-758-4757 to learn how we can provide mine safety training and consulting for your business.